Electrolux ERGP3314AW, Manual

Page: 37 / 104

Problem Possible cause Solution
Temperature cannot
be set . Shopping function switch-
ed on. Switch off Shopping man-
ually, or wait to set the tem-
perature until the function
has reset automatically. Re-
fer to "Shopping function".
The temperature in
the appliance is too
low/high. The temperature regulator
is not set correctly. Set a higher/lower tempera-
ture.
The door is not closed
correctly. Refer to "Closing the door".
The product temperature
is too high. Let the product tempera-
ture decrease to room tem-
perature before storage.
Many products are stored
at the same time. Store less products at the
same time.
The temperature in
the refrigerator is
too high. There is no cold air circu-
lation in the appliance. Make sure that there is cold
air circulation in the appli-
ance.
Upper or lower
square is shown in
the temperature dis-
play. An error has occurred in
measuring the tempera-
ture. Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible).
dEMoappears on
the Display.
The appliance is in dem-
onstration mode (dEMo). Keep pressed approximate-
ly 10 sec. the OK button
since a long sound of buz-
zer is heard and the Display
shut off for a short while:
appliance start works regu-
larly.
6.1 Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service Cen-
ter .
6.2 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective
door gaskets. Contact the Service
Center.
ENGLISH 37