Electrolux ERG17600, Instruction Booklet

Page: 4 / 17

15
Use
Energy savings tips:
• The room temperature affects the appliance's con-
sumption of electric current.
Therefore, avoid placing it near sources of heat or in
direct rays of sunlight.
If possible, choose a place that has a room temperatu-
re below the climate class indicated.
• Make sure there is sufficient ventilation.Do not cover
the ventilation slits.
• Do not cover the ventilation slits.
• Do not set a temperature lower than necessary.
• Let hot food products cool to room temperature before
placing them in the refrigerator.
• Put liquids inside covered containers only.
• Avoid keeping the refrigerator open unless it is neces-
sary.
• Clean the condensate regularly (see Defrosting and
Cleaning).
• Too thick a layer of frost causes needless consumption
of electric current. Small deposits of frost can be remo-
ved from time to time with a plastic scraper.
Control screen
A - Mains operation indicator
B - Ein/Aus (ON/OFF) button
C - Temperature setting button (.+. = warmer)
D - Temperature indicator
E - Temperature setting button (.-. colder)
F - SUPERFROST indicator
G - SUPERFROST button
H - SUPERCOOL indicator
I
- SUPERCOOL button
Using the refrigerator compartment
Starting the appliance
• Plug it into the socket.
• Press the EIN/AUS (B) (ON/OFF) button. The mains
operation indicator (A) lights up.
• Press one of the .+. (C) or .-. (E) buttons. The tempera-
ture indicator goes into operation and indicates the set
nominal temperature.
If the regulator is set at a higher level, wait about 4 hours
before loading the appliance.
The right temperature for loading food products to be coo-
led is +5°C.
Temperature adjustment
• By pressing one of the .+. (C) or .-. (E) buttons it is pos-
sible to switch from the actual temperature (the tempe-
rature indicator is lit and remains stationary) to the
nominal temperature (the temperature indicator blinks).
• By continuing to press one of the buttons, the nominal
temperature changes 1°C.
• If no button is pressed, the temperature indicator auto-
matically returns to the actual temperature after about
5 seconds.