Problem
Possible cause
Solution
The appliance is
noisy.
The appliance is not sup-
ported properly.
Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
The buzzer sounds.
The Alarm icon is
flashing.
The door is not closed
correctly.
Refer to "Door open alarm".
Upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture.
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible).
The compressor
runs continuously.
The Temperature regulator
may be set incorrectly.
Set a higher temperature.
The door is not closed
correctly.
Refer to "Closing the door".
The door has been
opened too frequently.
Do not keep the door open
longer than necessary.
The food temperature is
too high.
Let the food temperature
decrease to a room tem-
perature before storage.
The room temperature is
too high.
Decrease the room temper-
ature.
Water flows inside
the refrigerator.
The water outlet is clog-
ged.
Clean the water outlet.
Food blocks the water
passage to the water col-
lector.
Make sure that food does
not touch the rear plate.
Water flows on the
ground.
The melting water outlet
does not flow in the evap-
orative tray above the
compressor.
Attach the melting water
outlet to the evaporative
tray.
The temperature in
the appliance is too
low.
The Temperature regulator
may be set incorrectly.
Set a higher temperature.
The temperature in
the appliance is too
high.
The Temperature regulator
may be set incorrectly.
Set a lower temperature.
The door is not closed
correctly.
Refer to "Closing the door".
The food temperature is
too high.
Let the food temperature
decrease to room tempera-
ture before storage.
12 www.electrolux.com
