11. Remove the door closing device on the
door (h1). Screw on the door closing de-
vice provided within the accessory bag
on the opposite side (h2).
12. Reassembly the door.
13. Screw on the hinge pin (b) on the oppo-
site side.
14. Reassembly the covers (c) and (d) and
the front cover (a).
15. Raise the appliance and install the ven-
tilation grille.
g2
g1
h1
h2
16. Unscrew the handle. On the opposite
side remove the hole covers by driving a
3-4 mm drift or drill into them. Install the
handle. Fit the handle on to the opposite
side by turning it one half circle.
Install the hole covers provided within the
accessory bag.
17. Put the cabinet in position.
Warning!
Reposition, level the
appliance, wait for at least four hours
and then connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Warning!
If the ambient temperature is
cold (i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
Environmental concerns
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
16
electrolux
