background image

9

MAINTENANCE

Unplug the appliance before carrying out
any maintenance operation.

Warning

This appliance contains hydrocarbons in its cooling
unit; maintenance and recharging must therefore
only be carried out by authorized technicians.

Periodic cleaning

Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage the
plastics used in this appliance. For this reason it
is recommended that the outer casing of this
appliance is only cleaned with warm water with a
little washing-up liquid added.

Clean the inside with warm water and bicarbonate of
soda.

Rinse and dry thoroughly.

Clean the condenser (black grill) and the
compressor at the back of the appliance with a
brush or a vacuum cleaner. This operation will
improve the performance of the appliance and save
electricity consumption.

Periods of non-operation

When the appliance is not in use for long periods,
take the following precautions:

remove the plug from the wall socket;

remove all food;

defrost and clean the interior and all accessories;

leave the door ajar to allow air to circulate to prevent
unpleasant smells.

Interior light

The light bulb inside the refrigerator compartment
can be reached as follows:

unscrew the light cover securing screw.

unhook the moving part as shown in the figure.

If the light does not come on when the door

is open, check that it is screwed into place
properly. If it still does not light up, change
the bulb. The rating is shown on the light
bulb cover.

Defrosting

Frost is automatically eliminated from the evaporator
of the refrigerator compartment every time the motor
compressor stops, during normal use. The defrost
water drains out through a trough into a special
container at the back of the appliance, over the
motor compressor, where it evaporates.

It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside.
Use the special cleaner provided, which you will
find already inserted into the drain hole.

D037

D411

2223 40191_lidia.qxd  17/11/2006  15:47  Pagina  9

Summary of Contents for ERD 43391 X



















Reviews: