Electrolux ERB34205W, User Manual

Page: 11 / 20

Important! The appliance operates
discontinuously, so the stopping of
compressor does not mean being no
current. That is why you must not touch the
electrical parts of the appliance before
breaking the circuit.
Problem Possible cause Solution
The appliance is noisy. The appliance is not supported
properly.
Check if the appliance stands sta-
ble (all feet and wheels should be
on the floor). Refer to "Levelling".
The cushion spacers located be-
tween the back of the cabinet and
the pipes come loose.
Put them back in place again.
The buzzer sounds. The
Alarm light flashing.
The temperature in the freezer is
too high.
Refer to "Temperature Alarm"
Pilot light flashing. An error has occurred in measur-
ing the temperature.
Call your service representative
(the cooling system will continue to
keep food products cold, but tem-
perature adjustment will not be
possible).
The compressor runs
continuously.
The Temperature regulator may
be set incorrectly.
Set a warmer temperature.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
frequently.
Do not keep the door open longer
than necessary.
The food temperature is too high. Let the food temperature decrease
to room temperature before stor-
age.
The room temperature is too
high.
Decrease the room temperature.
Water flows on the rear
plate of the refrigerator.
During the automatic defrosting
process, frost defrosts on the rear
plate.
This is correct.
Water flows inside the re-
frigerator.
The water outlet is clogged. Clean the water outlet.
Food prevent that water flows in-
to the water collector.
Make sure that food do not touch
the rear plate.
Water flows on the
ground.
The melting water outlet does not
flow in the evaporative tray above
the compressor.
Attach the melting water outlet to
the evaporative tray.
There is too much frost
and ice.
Food are not wrapped properly. Wrap the food better.
The door is not closed correctly. Refer to "Closing the door".
The door gasket is deformed or
dirty.
Refer to "Closing the door".
The Temperature regulator may
be set incorrectly.
Set a warmer temperature.
The temperature in the
appliance is too cold
The Temperature regulator may
be set incorrectly.
Set a warmer temperature.
The temperature in the
appliance is too warm.
The Temperature regulator may
be set incorrectly.
Set a colder temperature.
The door is not closed correctly. Refer to "Closing the door".
electrolux 11