5
Electrolux 818 18 57-03/1
Hints:
·
Distribute foodstuffs to allow cold air to
circulate freely between the products.
·
Do not place food products directly against the
cooling plate on the rear wall since they may
freeze in this case.
·
Also never put warm products into the cabinet.
Wait until they have cooled down.
·
Cover all foods properly to avoid odours and
flavours from tainting other food.
Switching off
Turn the control anti-clockwise past the click
position to "
H
".
Unplug the power supply plug from the wall socket.
Cabinet interior
The shelves and door compartments are removable
and can easily be re-arranged.
Certain shelves must be lifted up by the rear edge to
enable them to be removed.
The lower door compartment and the glass shelf
above the vegetable drawer must not be moved.
They are required for proper air circulation inside the
cabinet.
Shelves with a raised edge should be placed with the
raised edge facing the rear wall of the cabinet, and
thus prevent food products from touching the
cooling plate.
Using the freezer
GB
To start the freezer and set the
correct temperature
Turn the thermostat control to the desired position.
MIN
The lowest position of the thermostat control
results in the highest temperature inside the cabinet.
MAX
The highest position of the thermostat control
results in the lowest temperature inside the cabinet.
H
:
Switched off.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
Once set, the temperature display shows "- -" until
the temperature inside the fridge reaches -1°C or
below.
Temperature inside the freezer
To ensure that foodstuff will keep for a long time, be
sure that the temperature inside the freezer is -18°C
or below. Please note, however, that the energy
consumption increases as the temperature decreases.
The built-in temperature display shows the warmest
temperature inside the freezer. If the temperature is
measured using a thermometer, put it between the
products since this will reflect the real temperature
in the frozen products. It is normal that the built-in
temperature display shows a temperature slightly
above that measured in other ways.
