Electrolux ERB 9044, Instruction Book, Page: 16 / 22

74
Electrical connection
This refrigerator is designed to operate on a 230
V AC (~) 50 Hz supply.
The plug must be put into a socket with protective
contact. If there is no such, it is recommended to get
an electrician to fit an earthed socket in compliance
with standards near the refrigerator.
This appliance complies with the following E.E.C.
Directives:
73/23 EEC of 19.02.73 (Low Voltage Directive) and
subsequent modifications,
89/336 EEC of 03.05.89 (Electromagnetic
Compatibility Directive) and subsequent modifications.
Opening both doors fix the double door hinge onto the
left side using the screws (2 pieces) (c). Do not forget to
replace the plastic spacer (b) under the hinge. Be
careful that the door edges are parallel with the edge of
the mantle.
Put over the handles (r) on the other side and put the
plastic covering nails (p) supplied in the plastic bag of
this instruction book into the holes set free. (fig.5)
Put the appliance to its place, set it level, and apply to
voltage it.
In case you do not want to perform the procedures above,
call the nearest brand-mark service. Technicians will
accomplish the refitting expertly for charge.
fig. 5.
GB