Electrolux ERA34372W User Manual Download Page 11

1

2

5

3

4

e

f

• Lift up the appliance to vertical position.
• Open the door and reposition the upper

door plastic trim with screws.

• Unscrew the handle. On the opposite side

remove the hole covers. Fix the handle on
the opposite side, insert the plastic plugs
into the holes left open that can be found
in the instruction for use bag.

Warning!

 Reposition, level the

appliance, wait for at least four hours
and then connect it to the power socket.

In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the re-
versibility of the doors at your cost.

Warning!

 After having reversed the

opening direction of the doors check
that all the screws are properly tightened
and that the magnetic seal adheres to
the cabinet.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket. Lay down
the appliance back side down.

ENVIRONMENTAL CONCERNS

The symbol  

  on the product or on its

packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for

the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.

electrolux 

 11

Summary of Contents for ERA34372W













Reviews: