Electrolux ER8207C, Instruction Booklet, Page: 5 / 10

13
Electrolux 818 17 33-00/0
Protect the environment
·
Hand over the cabinet packaging and discarded
fridges and freezers to a recycling station.
Contact your local city office or your closest
dealer for more information.
·
Keep foodstuff in re-usable containers. Cut down
on disposable material as much as possible.
·
When cleaning the cabinet, use a mild
washing-up detergent.
·
Follow the advice in the section "Saving energy"
·
The door gasket and coolant used in this
cabinet will not harm the ozone layer.
·
All parts in the packaging can be recycled.
·
The cabinet has been designed for easy
dismantling and subsequent recycling.
Maintenance and Cleaning
GB
Removing the ventilation grille
The ventilation grille can be removed, e.g. to wash
the grille.
Unsnap the ventilation grille by pulling it toward
you.
Cleaning
Clean the cabinet at regular intervals.
Do nt use detergents, abrasive powers,
high perfumed cleaning products, wax
polishes or cleaning products
containing bleach or alcohol when
cleaning the product
Clean out the drip channel inside the fridge at
regular intervals and ensure that the drip channel is
clear att all times. If bocked carefully clear using a
piece of flexible curtain wire inserted into the drain
outlet to remove the blockage.
Disconnect the appliance from electricity supply.
Internal Cleaning
Clean the inside and accossories with warm wather
and bicarbonate of soda (5ml to 0,5 liter water) Rise
and dry thoroughly.
Regularly check the door seals and wipe clean to
ensur they are clean and free from debris.
External Cleaning
Wash the outer cabinet with warm sopy water.
Remove the ventilation grille (see the section
"Removing the ventilation grille") and vacuum-clean
under the cabinet. Twice a year pull out the cabinet
from the wall and vacuum-clean the backside of the
cabinet, the refrigerating system and the compressor.
Defrosting the fridge
The fridge is defrosted automatically every time the
compressor stops. Frost formation can be prevented
by:
· not putting warm foodstuff inside the cabinet.
·
avoiding frequently opening the door or keeping
it open too long.
· do not place foodstuffs directly against the cold
cooling plate.
When moving the cabinet, lift it by
the front edge to avoid scratching the
floor.