14
Building-in instructions
Housing dimensions
Height
1780 mm
Depth
550 mm
Width
560 mm
For safety reasons, minimum ventilation must be as
shown in Fig. 2:
Attention: keep ventilation openings clear of ob-
struction.
Fig. 2
Push appliance into housing until stop strip (A) touch-
es the kitchen unit.
Fig. 3
If after having carried out the operation described in
section 3 there is still some space left between the ap-
pliance and the kitchen unit, fit the trimming provided
together with the appliance on the stop strip (A).
Fig. 4
D027
50-min. cm
2
200
min.
cm
2
200
A
D023
D265
A
Open the door and push the appliance against the
side of kitchen furniture opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the kit
included with the appliance. Snap vent grill (C) and
hinge cover (D) into position.
Fig. 5
Press in the joint covers between the appliance and
the kitchen furniture.
Fig. 6
Apply covers (B) on joint cover lugs and into hinge
holes.
Fig. 7
D092
D
C
D098
D096
B
