Electrolux ER 7521 B, Instruction Book, Page: 3 / 20

3
CONTENTS
2222 069-92
Instructions for the User
Important Safety Information
2
Description of the Appliance
4
Operation
5
Before use 5
Setting the temperature 5
The freezer compartment 5
Freezing fresh food 5
Frozen food storage 5
Thawing 6
Making ice cubes 6
Fresh food refrigeration 6
Normal operating sounds 6
Movable shelves 6
Hints and Tips
7
Maintenance and Cleaning
8
Internal cleaning 8
External cleaning 8
When the appliance is not in use 8
Changing the light bulb 8
Defrosting 8
Something Not Working
10
Service and Spare Parts
11
Customer Care
11
Guarantee Conditions
14
Instructions for the
Installer
Technical Specification
15
Installation
16
Positioning 16
Rear Spacers 16
Electrical Connection
17
Door Reversal
18
18
Door reversal
1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store
food in a cool place.
3. Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
inches) of packing;
4. Remove the feet (2-3)
5. Remove bottom hinge (1).
6. Remove the freezer door by releasing it from the
middle hinge (H).
7. Unscrew the middle hinge.
8. Slide out the fridge door from pin (D), unscrew
the latter and then screw it down into the hinge
provided on the opposite side, after having
removed the small plugs (I) which should then be
fitted on the opposite side.
9. Refit the fridge door and replace the middle hinge
to the left hand side.
10.Replace the door and bottom hinge (1) on the
opposite side.
11.Refit the feet (2-3) on the opposite side.
12.Unscrew the handles. Refit them on the opposite
side.
13.The doors can be aligned by adjusting the
middle hinge.
14.The middle hinge can be adjusted horizontally
with a screwdriver, after having slackened the two
screws.
Retighten the screws after adjustment.
Attention
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a cool setting.
D
D590
H
PR04
D715 PIED/M
1
2
3