background image

18

Door reversibility

The appliance’s door has been locked in position for
transport by means of pins on both sides. According
to the door opening direction, remove relevant pins at
the top and at the bottom.

Warning!

If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.

D163

B

A

Instructions for totally built-in
appliances

Dimensions of the recess

Height of housing

mm 880

Depth of housing

mm 550

Width of housing

mm 560

1. It is necessary that the niche is provided with a

conduct of ventilation having the following
dimensions:
Depth

50 mm

Width 540 mm

50 mm

min.
cm

2

 

 

200

200 cm

2

min.

D526

540

50

560

550

880

PR 32

For safety reasons, minimum ventilation must be
as shown in Fig.

Attention: keep ventilation openings clear of
obstruction.

A

D022

2.

Slide the appliance into the recess, pushing it
against the wall on the handle side.

3. Apply joint the sealing strip as shown in figure.

D132

Summary of Contents for ER 6632 I















Reviews: