8. Use the switch when turning the heating/
9. Do not fasten, twist or tie the power cord. if
7. Do not pull out or insert the plug with wet
cooling On/Off. Locate on the left back
hands to avoid electric shock.(Fig. 3)
side of water dispenser.(page 6)
the power cord is damaged, it should be
replaced by the manufacturer, service
technician or a qualified person to prevent
any risk.
10. Keep the unit in a dry place and away from
11. To avoid damage to the unit, do not plug the
direct sunlight. Do not place the machine on
paper or foam. Do not place anything
flammable beside this machine.(Fig. 4)
12. Unplug the unit when the unit will not be
used for a long period for the reason of
saving electricity.
14. Never use organic liquids polishing chemical
13. Never turn the unit upside down or tilt it
more than 45°.(Fig. 5)
to clean the machine.
15. The thermostat to control temperature has
been set up by
There is no
manufacturer.
need to adjust it yourself.
Fig. 3
Fig. 4
Fig. 5
power cord or turn on the heating switch
until the water can flow out from the hot water
spout when the hot water button be activated.
5
Summary of Contents for EQAXF01BXSI
Page 1: ...EQAXF01BXSI EQAXF01BXWI INA PANDUAN PENGGUNA 1 ...
Page 16: ......
Page 17: ...EQAXF01BXSI EQAXF01BXWI USER MANUAL 1 EN ...
Page 32: ......