63
Installation Instructions
1
Attention:
The new appliance may only be installed and connected by a
registered expert
.
Please comply with this. If you do not, any damage resulting is not covered
by the warranty.
1
Safety information for the installer
•
The electrical installation is to be set up so that the appliance can be iso-
lated from the mains with a minimum 3mm all-pole contact separation.
Suitable separation devices include e.g. cut-outs, fuses (screw fuses are
to be taken out of the holder), RCD’s and contactors.
•
The site must provide a connection to the electrical supply by means of a
socket such that the socket is accessible and outside the coordination
space.
•
The built-in unit must meet the stability requirements of DIN 68930.
•
Built-in ovens and built-in cooking surfaces are fitted with special connec-
tion systems. For safety reasons, they must only be combined with appli-
ances from the same manufacturer.
592
567
388
520
min.560
380-383
min.5
50
20
252
375
13
Summary of Contents for EOK8837
Page 65: ...65 alternativ ...
Page 66: ...66 ...