Problem
Possible cause
Remedy
The oven does not heat up. The fuse is released.
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
The lamp does not operate. The lamp is defective.
Replace the lamp.
The core temperature sen-
sor does not operate.
The plug of the core tem-
perature sensor is not cor-
rectly installed into the
socket.
Put the plug of the core
temperature sensor as far
as possible into the socket.
There is water inside the
oven.
There is too much water in
the tank.
Deactivate the oven and
wipe the water with a cloth
or sponge.
The steam cooking does
not work.
Lime obstructs the hole.
Check the steam inlet
opening. Remove the lime.
The steam cooking does
not work.
There is no water in the
tank.
Fill the water tank.
It takes more than three mi-
nutes to empty the water
tank or the water leaks from
the steam inlet opening.
There are lime deposits in
the oven.
Clean the water tank. Refer
to "Cleaning the water
tank".
It takes too long to cook the
dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the ad-
vice in the user manual.
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
The display shows "C2".
You want to start the Pyrol-
ysis or the Defrost function,
but you did not remove the
core temperature sensor
plug from the socket.
Remove the core tempera-
ture sensor plug from the
socket.
The display shows "C3".
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
Fully close the door.
www.electrolux.com
34