Electrolux EOC5631AOX, User Manual

Page: 11 / 36

6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change
the time of day only when the appliance is off.
DURATION To set how long the appliance operates. Use only
when an oven function is set.
END To set when the appliance deactivates. Use only
when an oven function is set.
TIME DELAY Combination of DURATION and END function.
MINUTE MINDER Use to set a countdown time. This function has no
effect on the operation of the appliance. You can set
the MINUTE MINDER at any time, also if the appli‐
ance is off.
00:00 COUNT UP TIM‐
ER
If you do not set any other clock function the
COUNT UP TIMER automatically monitor how long
the appliance operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the func‐
tions: DURATION, END, core temperature sensor.
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
and
"12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set
the minutes.
The display shows and the set
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
6.3 Setting the DURATION
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes
and then the hours for DURATION
time. Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
and time
setting flash in the display. The appliance
deactivates automatically.
4. Press any button or open the oven
door to stop the acoustic signal.
5. Turn the knob for the oven functions
to the off position.
6.4 Setting the END
1. Set an oven function.
2. Press again and again until
starts to flash.
ENGLISH 11