Problem
Possible cause
Remedy
The lamp does not oper‐
ate.
The lamp is defective.
Replace the lamp.
The core temperature sen‐
sor does not operate.
The plug of the core tem‐
perature sensor is not cor‐
rectly installed into the
socket.
Put the plug of the core
temperature sensor as far
as possible into the socket.
It takes too long to cook
the dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
Steam and condensation
settle on the food and in
the cavity of the oven.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
The display shows "C2".
You want to start the Pyrol‐
ysis or Defrost function, but
you did not remove the
core temperature sensor
plug from the socket.
Remove the core tempera‐
ture sensor plug from the
socket.
The display shows "C3".
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
Fully close the door.
The display shows "F102". • You did not fully close
the door.
• The door lock is defec‐
tive.
• Fully close the door.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows
"F102" again, contact
the Customer Care De‐
partment.
The display shows an error
code that is not in this ta‐
ble.
There is an electrical fault. • Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
ENGLISH
29
Summary of Contents for EOC5631AOX
Page 1: ...EOC5631AOX EN Oven User Manual ...
Page 34: ...www electrolux com 34 ...
Page 35: ...ENGLISH 35 ...