Electrolux EOB5751BA, User Manual

Page: 12 / 24

6.6 Setting the Time delay
function
The DURATION and END functions
can be used at the same time, if the oven
is to be activated and deactivated auto-
matically later. In this case, first set the
DURATION
and then the END
function (refer to "Setting the DURATION"
and "Setting the END ").
When the Time delay function is activated,
the display shows a static symbol of the
oven function,
with a dot and . The
dot shows which clock function is on in
the Clock / residual heat display.
7. AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information"
chapter.
There are 9 automatic pro-
grammes and recipes. Use an au-
tomatic programme or recipe
when you do not have the knowl-
edge or experience on how to
prepare a dish. You can find the
list of the recipes for the automatic
programmes in the "Recipe
book".
There are three types of automatic
programmes:
• Automatic recipes
• Automatic programmes with weight in-
put
• Automatic programmes with the core
temperature sensor
7.1 Automatic recipes
Setting an automatic recipe:
1.
Activate the appliance.
2.
Touch . The display shows the
number of the automatic programme
(P1 – P9).
3.
Touch or to choose the auto-
matic recipe.
4.
Touch or the automatic recipe
activates automatically after five sec-
onds.
5. When the set time ends, an acoustic
signal sounds for two minutes. The
symbol
flashes. The appliance de-
activates.
6. Touch a sensor field or open the door
to stop the acoustic signal.
7.2 Automatic programmes with
weight input
If you set the weight of the meat, the ap-
pliance calculates the roasting time.
1. Activate the appliance.
2.
Touch .
3.
Touch or to set the weight
programme (refer to the "Recipe
book").
The display shows: the cooking time,
the duration symbol
, a default
weight, a unit of measurement (kg, g).
4.
Touch or the settings save auto-
matically after five seconds.
5. The appliance activates. A symbol of
the weight unit flashes in the display.
During this time you can change the
default weight value with
or .
Touch .
6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.
7. Touch a sensor field or open the door
to stop the acoustic signal.
7.3 Automatic programmes with
the core temperature sensor
The core temperature of the food is de-
fault and fixed in programmes with the
core temperature sensor. The programme
ends when the appliance is at the set
core temperature.
1. Activate the appliance.
2.
Touch .
3.
Install the core temperature sensor
(refer to "The core temperature sen-
sor").
12 www.electrolux.com