Electrolux EOB33200, Instruction Booklet

Page: 10 / 36

10 electrolux
Electronic programmer
4
5
1 2 3
6
7
8
Fig. 4
1. 1. 1. 1. 1.
Push button for selecting a function
2. 2. 2. 2. 2.
Decreasing control button “ ”
3. Increasing control button “ ”
4. Display
5. “Cooking Duration” pilot lamp
6. “End of cooking” pilot lamp
7. “Minute minder” pilot lamp
8. “Time of day” pilot lamp
The oven will only work if the
time of day has been set.
However, the oven can also be
operated without any programme.
Setting the time of day
When the power supply is switched on,
or after a power failure, the “Time of day”
pilot lamp will flash on the display.
To set the correct time of day:
1.
Press button “ ” or “ ”.
2. After the setting is carried out, wait
for 5 seconds: the “Time of day” pilot
lamp
will go out and the display
will show the set time. The appliance
is ready for use.
To reset the correct time of day:
1. Press button repeatedly to select
the “Time of day” function. The
relevant pilot lamp will start flashing.
Then proceed as described above.
The time of day can only be reset if
no automatic function (cook duration
or end of cooking ) has been
set.
In the event of a power failure,
all the settings (time of day,
programme setting or
programme in operation) will
be cancelled.
When the power is restored,
the numbers in the display will
flash, and the clock/timer has
to be reset.