Electrolux EOB 66713, User Information, Page: 21 / 41

21
Beep on control
You can set the oven so that it beeps each
time a control is touched.
This function can only be activated when the
oven is switched off.
1. Touch the controls and “ ” at the
same time for about 3 seconds. The alarm
signal beeps once (Fig. 17).
How to disable the “Beep” Function:
1. With the oven switched on, touch the
control so that the oven switches off.
2. Touch the controls and “ ” at the
same time for about 3 seconds. The
acoustic alarm beeps once.
Error Codes
The electronic programmer does a continuous
diagnostic check of the system. If parameters
are not correct, the activated functions are
stopped and the corresponding error code (the
letter “
F ”, followed by numbers) appears.
If an error code is displayed in the oven’s
electronic control panel, the light bar also
lights up.
For further details, see the section “If
something is wrong” on page 34.
Fig. 17