Electrolux ENB 43691 S, User Manual, Page: 25 / 60

electrolux 25
Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
serial number plate correspond to your
domestic power supply. Voltage can
vary by ±6% of the rated voltage.
For operation with different voltages, a
suitably sized auto-transformer must
be used.
The a
appliance m must b be e earthed.
The power supply cable plug is provided
with a contact for this purpose.
If the domestic power supply socket is
not earthed, connect the appliance to
a separate earth in compliance with
current regulations, consulting a
specialist technician.
The M
Manufacturer d declines a all
responsibility iif tthe a above ssafety
precautions a are n not o observed.
This appliance complies with
the following E.E.C. Directives:
• 87/308 E EEC of 2/6/87 relative to
radio interference suppression.
• 73/23 E EEC of 19.2.73 (Low Voltage
Directive) and subsequent
modifications;
• 89/336 E
EEC of 3.5.89
(Electromagnetic Compatibility
Directive) and subsequent
modifications.
A
C
B
Shelf holders
Your appliance is equipped with shelf
retainers that make it possible to
secure the shelves during
transportation.
To remove them proceed as follows:
Move the shelf holders in the direction
of the arrow, raise the shelf from the
rear and push it forward until it is freed
and remove the retainers.
Door reversibility
The door reversibility is not possible.