Electrolux EL8502 Owner'S Manual Download Page 5

3

Vacuuming with accessories

For your safety, turn power switch to ‘off’ before
attaching accessories. Press switch to ‘hard floor’
setting when using accessories.

To use accessories: With Quick Release handle in upright
position, rotate handle release latch forward, then lift
handle and pull away from vacuum cleaner body (Fig. 1).

Extend or shorten the telescopic wand by pressing
release button

(Fig. 2).

Use crevice tool or turbo nozzle with or without wand.
Press button

to pull wand off handle (Fig. 2).

Dusting brush

Use for baseboards, furniture, vents and blinds (Fig. 4).

To use, press dusting brush button

and slide brush

to end of wand until it clicks (Fig. 3).

After using, slide brush back until it clicks.

Turbo nozzle

Use for stairs and upholstered furniture (Fig. 6).

To use, push nozzle onto handle or wand until snug.

Store turbo nozzle on front of vacuum.

Position vacuum cleaner on floor at bottom of stairs,
pushed against bottom step (Fig. 7).

For your safety, do not place vacuum at top of stairs
or on steps.

Electrolux Customer Service 1-800-896-9756

Fig 1

Fig 2

Fig 3

Fig 4

Fig 5

Fig 6

Fig 7

Fig 8A

Fig 8B

Crevice tool

Use for grooves, narrow openings, tight spaces (Fig. 5).

To use, push tool onto handle or wand until snug.

Store crevice tool on back of vacuum.

After using accessories

Press button

to shorten wand. Press button

and

slide dusting brush back into storage position (Fig. 2).

If wand is off, push back onto handle until it clicks.

Place wand into opening on back of vacuum (Fig. 8A).

Align ribs on wand into grooves at top of vacuum
(Fig 8B). Push down handle until it locks into position.

!

!

E

N

G
L

IS

H

Summary of Contents for EL8502










Reviews: