Setting
To set, press and release the desired function, and within 5 seconds
set the time
using the
+ and - buttons.
+ and - buttons.
The + and - buttons increase
and
decrease the time
respectively
the
speed depending on how long the button is pressed.
Setting the time
Press any two buttons (cooking time, end time, minute
minder
) at
the same time, and + or - button to set the desired time. This
deletes any previously set programme. The contacts are switched
off and the AUTO symbol flashes.
Manual use
When
the manual button
is pressed
the relay contacts switch on,
the AUTO symbol switches off and the saucepan symbol lights up.
Manual operation can only be enabled after the automatic
programme is over it has been cancelled.
Automatic
function
Press the cooking time or end time button to switch automatically
from the manual to the automatic function.
.
INSTRUCTIONS FOR
USING
THE
CONTROL
DEVICE
Minute
minder
Cooking time
Cooking end
Manual
Decrease
time
Increase
time
32
A
U
T
O
Display
4-
digit
, 7-
section
di
s
play for cooking times and
clock
.
Cooking time and manual function
=
saucepan symbol
Automatic function
=
AUTO
Minutes
minder
=
bell symbol
The symbols light up when the corresponding functions are
selected.
LED PROGRAMMER (Fig. 4)
Features
24 hours clock with automatic
timer
and minute
minder
.
Functions
Cooking time, cooking end time, manual position, clock,
minute
minder
,
maximum programmable
time
23 hours 59 minutes.
When the set time is
finished
, the
acoustic signal sounds
and the
bell symbol switches off.
Acoustic
signal
The
acoustic signal sounds
at the end of a programme or of the
minutes
minder
function and it lasts for a
maximum of
15 minutes.
To stop it, push any one of the functions buttons.
Start programme and check
The programme starts 4 seconds after it has been set.
The programme can be
verified
at any time by pressing the
corresponding button.
Setting error
A setting error is made if the time of day on the clock falls within
the cooking start and end times.
To correct the setting error, change the cooking time or cooking
end time.
The relays switch off when a setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then press
the - button until 00 00 appears on the display.
A set programme will automatically cancel on completion.
Automatic use
to set
cooking time and end time
Press the cooking time button and select the
duration
of the
cooking time with + or - button. The AUTO and cooking time
symbols light up continuously. The relay switches on.
When
the
cooking end time button
is pressed
the next cooking end time
is
shown
on the display. Set the cooking end time with + button. The
relay and the cooking time symbol switch off.
The symbol lights up again when the cooking start time
is reached
.
When the cooking time is
finished
, the AUTO symbol flashes, the
acoustic signal sounds and both
the cooking time symbol and the
relay switch off.
Minutes
minder
Press the minute minder button and set the cooking time with +
or - button.
The bell symbol lights up when the minutes
minder
is operating
Semi-automatic use
to set
cooking time
Press the cooking time button and set the desired time with + or
-. The AUTO and cooking time symbols light up continuously. The
relay switches on immediately. When the cooking end time
is
reached
, the relay and cooking time symbol switch off, the
acoustic
signal sounds
and the AUTO symbol flashes.
Semi-automatic use
to set
end time
Press the end time button. The time of day appears on the display.
Set the cooking end time with + button. The AUTO and cooking
time symbols light up continuously. The relay contacts switch on.
When the cooking end time
is reached
, the relay and the cooking
time symbol switch off. When the cooking time is
finished
, the
AUTO symbol flashes, the
acoustic signal sounds
and both the
relay and the cooking time button switch off.
Fig. 4
GB
