1
Grill burner
Warning!
Before replacing the nozzles
ensure that the gas knobs are in OFF
position and disconnect the appliance
from the electrical supply.
Nozzle replacement
1. Remove the grill burner after removing
the fixing screws.
2. Replace the nozzle by means of a No 7
socket spanner.
3. Refit all parts and test.
4. Before fixing of the screws, ensure that
the grill burner is pushed correctly to the
back panel.
A
Adjustment of minimum level
To adjust the minimum level of the burners,
proceed as follows:
1. Light the burner knob on maximum flame
position and leave the oven door closed
for about 10 min.
2. Turn the knob slowly to the minimum
flame position.
3. Remove the knob.
4. Unscrew or screw the by-pass screw (it
is on the left of tap shaft) until a regular
small flame is reached.
For LPG screw completely the by-pass
screw.
Reassemble the parts following the same
procedure backwards.
Finally, check the flame does not go out
when quickly turning the knob from the max-
imum position to the minimum position.
After completion of any repairs, adjust-
ments or conversion the statutory safety
tests , must be carried out.
Grill burner
The grill temperature cannot be adjusted. To
obtain a lower temperature or slower cooking
time the grill pan must be lowered away from
the flame.
electrolux
19
