Electrolux EKG 101199 X, Instruction Booklet

Page: 12 / 25

C
C
GB
Always isolate the cooker from the electricity supply,
shut off the gas supply temporarily and proceed as
follows:
- remove the grids
- remove burners and flame-spreaders
(see fig. 13).
- change the injector (see fig. 14).
Re-assemble everything in reverse order, ensuring
you position the flame-spreader correctly.
To change the oven injector , it is necessary to
act as follows: open the oven door, remove the
lower side of the oven (see fig. C), unscrew screw
C and disassemble the oven burner (see fig. D).
Change the injector (see fig. E).
Re-assemble everything in the opposite direction,
paying attention to place the burner in the right way
on its rear slot.
FIG.C
FIG.E
FIG.D
C
Fig. 13
Fig. 14
C = Injector triple crown
12
REPLACEMENT OF INJECTORS
APPLIANCE MAINTENANCE