Electrolux EKC60752 User Manual Download Page 42

Page: 42 / 72

2. Press and hold the Selection

and

buttons at the same time, until

“SAFE” appears in the display.

The child safety device is now set.

CANCELLING

THE

CHILD

SAFETY

DEVICE

1. If necessary, switch on the appliance

using the On/Off

button.

2. Press and hold the Selection

and

buttons at the same time, until

“SAFE” disappears from the display.

The child safety device is now cancelled
and the appliance is again ready for use.

Button lock

To ensure that oven functions set are not
accidentally altered.

ACTIVATING

THE

BUTTON

LOCK

1. If necessary, switch on the appliance

using the On/Off

2. Select the oven function.

3. Press and hold the Selection

and

buttons at the same time, until

“LOC” appears in the display.

The button lock is now engaged.

CANCELLING

THE

BUTTON

LOCK

Press and hold the Selection

and

buttons at the same time, until “LOC”
disappears from the display.
The button lock is automatically lifted when
the oven function is switched off.

Summary of Contents for EKC60752









































































Search results

Summary of Contents for EKC60752

Reviews:

Brands by name

Popular brands

Electrolux EKC60752, User Manual

Search results

Summary of Contents for EKC60752

Reviews:

Brands by name

Popular brands