manualshive.com logo in svg

Electrolux EKC60110, User Manual, Page: 22 / 44

Share
Download
Electrolux EKC60110 User Manual Download Page 22

21

The roasting thermometer

When the set internal temperature is 
reached, a signal sounds.

NOTE

! 

THE

 

OVEN

 

IS

 

NOT

 

TURNED

 

OFF

 

AUTOMATICALLY

!

There is a cap in the thermometer outlet to 
protect it from splashes. 
After the roasting thermometer has been 
used, this cap should be replaced when the 
oven has cooled down.

It is advisable to use the roasting 
thermometer with top/bottom heating.

Note: You must only use the 
thermometer provided! Buy exactly 
the same thermometer if you need 
to replace it!

1. Stick the tip of the thermometer all 

the way into i the food that is to be 
roasted or grilled so that the tip is in 
the centre of the meat.

2. Stick the thermometer contact into 

the outlet on the side wall of the oven 
as far as it will go.

3. Set the desired oven function and 

temperature.

A pre-set temperature is shown in the 
display.

The temperature is first displayed when it 

reaches 30 

o

C and higher. 

Summary of Contents for EKC60110













































Reviews:

No comments