background image

2

 WARNINGS

It is very important that this instruction book
should be kept safety for future consultation.
If it should be sold or given to another
person, please ensure that the booklet goes
together with it, so that the new owner can
know the functions of the machine and also
be aware of the warnings.
This warnings has been given for your and
others safety.

  This appliance has been designed for

use by adults. Take care therefore, that
children do not attempt to play with it.

  When receiving the appliance, unpack it

on the spot. Check the general aspect of
the appliance.

  Your appliance is intended only for

normal household use. Never use it for
other purposes, as commercial or
industrial.

  It is dangerous to modify, or attempt to

modify, the characteristics of this
appliance.

  On first use, heat the oven empty in

order to eliminate the unpleasant smells
of the thermal insulation of the oven and
residual grease used in manufacturing.

- Lift the cover.
- Remove the accessories in the oven.
- Remove all type of stickers and plastic
protection.
- Heat the oven for about 45 min, knob on
maximum position. During this operation the
appliance with smoke, air the kitchen for
eliminating the swells and the smoke. The
accessories too, should be washed before
the first use.
The use of a gas cooking appliance
produces, heat and humidity in the room in
which it is installed. Ensure good ventilation
of the room keeping natural ventilation
openings clear or installing a mechanic
ventilating device.

An intensive and prolonged use of the
cooker could necessitate a supplementary
airing by opening the window, or a more
effective ventilation by increasing the
mechanical device power, if there is.

  In case you use electric appliances near

the cooker (for instance an electric mixer)
the cables should not come into touch
with the hot parts of the cooker or
fastened by the oven door of the cooker.

  Supervise when frying in oil or greys

(chips…), hot greys ran cause fires
easily.

  Unstable or deformed pans should not be

placed on the burners in order to avoid
accidents caused by upsetting or boiling
over.

  Never pule the appliance by the oven

handle. Beside the accessories in the
oven you can use only heat-proof pans
(see instructions of the manufacturers).

 Do not put products for cleaning or

inflammable material in the drawer (if
your cooker has one) or near the cooker.

  On the open oven door never put :

-

 heavy 

things,

-

  ensure that children do not climb up or

sit on it.

 

Always use gloves to remove dishes from

oven or when you come close to the hot
elements of the cooker.

 Do not cover the bottom of the appliance

with aluminium foil, over heating causes
damaging of the enamel,

 Never use the dripping pan as roasting

tray,

 In order to avoid damage of knobs do not

have opened the oven door when it works
or it is still hot.
The flame of the burner has to be smooth.
Avoid draught. If the flame is not regular
clean the burner and if the anomaly persists
call your after sales service.

 After use of your gas cooker ensure that a

the knobs are on “Off” position.

Summary of Contents for EK 5002






















Reviews: