Electrolux EIP8546, User Manual

Page: 21 / 68

Problem Possible cause Remedy
The diameter of the bottom
of the cookware is incor‐
rect for the activated func‐
tion or function mode.
Use cookware with a diam‐
eter applicable to the acti‐
vated function or function
mode. Use cookware with
a diameter smaller than
160 mm on a single sec‐
tion of the flexible induction
cooking area. Refer to
"Flexible induction cooking
area".
comes on.
Child Safety Device or
Lock operates.
Refer to "Daily use".
The control bar blinks. There is no cookware on
the zone or the zone is not
fully covered.
Put cookware on the zone
so that it fully covers the
cooking zone.
The cookware is unsuita‐
ble.
Use suitable cookware.
Refer to "Hints and tips".
The diameter of the bottom
of the cookware is too
small for the zone.
Use cookware with correct
dimensions. Refer to
"Technical data".
FlexiBridge (Flexible
Bridge) operates. One or
more sections of the func‐
tion mode which operates
are not covered by the
cookware.
Place the cookware on the
correct number of sections
of the function mode which
operates or change the
function mode. Refer to
"Flexible induction cooking
area".
comes on.
PowerSlide operates. Two
pots are placed on the flex‐
ible induction cooking
area.
Use only one pot. Refer to
"Flexible induction cooking
area".
and a number come on. There is an error in the
hob.
Deactivate the hob and ac‐
tivate it again after 30 sec‐
onds. If comes on again,
disconnect the hob from
the electrical supply. After
30 seconds, connect the
hob again. If the problem
continues, speak to an Au‐
thorised Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from
the electrical supply. Ask a
qualified electrician to
check the installation.
ENGLISH 21