17
Operating Instructions
Suitable options will automatically be indicated
when the cycle is selected.
To add
options
, press the corresponding
options
buttons to illuminate the selections desired. To
delete
options
, press the
options
buttons again
and the indicator lights will turn off. Some Options
require a “
press & hold
” effort to activate or deacti-
vate the secondary function.
To protect your fabrics, not all
options
are available
with every cycle. The indicator will not light if the
option
is not available with that cycle. Occasion-
ally, two options in the same cycle will confl ict with
each other, like
add steam
and
eco friendly
. When
this happens, the option selected fi rst will cause the
confl icting option to not be selectable.
Cycle Options
NOTE
To change the
options
once the cycle has
begun, press the
pause
button, make the new
selections and press
start
again.
All
options
selected for the cycle, except
add
steam
will be remembered and recalled each time
that cycle is selected in the future. To prevent
unintentional and accidental exposure of delicate
material to unexpected steam, the
add steam op-
tion
will not be remembered and must be rese-
lected each time.
NOTE
The
add steam
option
will be retained and recalled
if it is selected and saved in the
my favorite cycle
.
STAIN TREAT
Stain treat
uses a special 10 minute soak/pretreat
agitation before the main wash. It fi lls initially with
detergent and cold water to prevent protein stains
from setting, then the internal heater is activated to
heat the wash water to remove non-protein based
stains. Can be used with
prewash
for the toughest
stains.
LIGHT (press & hold)
The drum light will come on whenever the door is
opened to illuminate the drum during loading and
unloading. Closing the door turns off the light. The
drum light will automatically turn off if the door is
left open more than 3 minutes.
You can activate the drum light during a cycle by
pressing and holding the
stain treat
button. The
light will stay on during the cycle for 3 minutes. To
turn it off, press and hold the button again.
DELAY START
Press
delay start
to select a wash time convenient
to your schedule or during off peak energy hours.
The delay time selected will be displayed and be-
gin counting down when you select
start
.
CHIME (press & hold)
A signal will sound at the end of the cycle if this
option is selected.
PREWASH
Select this
option
to add a short initial wash peri-
od to a cycle. Heavily soiled and stained loads will
prewash for approximately 5 minutes. The water
will drain and the load will automatically advance
to the regular wash cycle.
See step 5 in “Operating Your Washer” section in this
guide for details on adding detergent to the dispenser.
MAX FILL (press & hold)
Increase the water fi ll level of the agitation portion
of any wash cycle.
