Electrolux EHS7631P, Installation And Operating Instructions Manual

Page: 12 / 24

12
Displaying the time remaining for a cooking zone
Switching off the acoustic signal
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
• If one or more sensor fields are covered by objects
(a pan, cloths, etc.) for longer than approx. 10 sec-
onds, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after ap-
prox. 10 seconds.
Control panel
• When the appliance is switched off, if one or more
of the sensor fields on the control panel are cov-
ered for more that 10 seconds, an acoustic signal
sounds. The acoustic signal switches itself off au-
tomatically when the sensor fields are no longer
covered.
Cooking zones
• If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automati-
cally.
_
is displayed. Before being used again, the
cooking zone must be set to 0.
Step Control panel field Display
1. TIMER Select cooking zone Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Step Control panel field Acoustic signal
1.
Touch TIMER Acoustic signal to acknowledge.
Acoustic signal stops.
Heat setting Switches off after
V, 1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours