18
… after cooking zone switch-off the dis-
play will not show
_
or
h
for residual
heat?
Check, whether
–
the cooking zone has only been in operation for a
short while, and is therefore not hot enough.
If the cooking zone is hot, please contact your local
Service Force Centre.
… a cooking zone cannot be switched
on?
Check, whether
–
the child-safety (symbol
l
) is switched on.
... the cooking zone automatically
switches back to setting
7
during cook-
ing?
Because the temperature is too high, the electronic
control thermal cut-off has triggered an automatic re-
duction of the cooking setting. You can increase the
cooking setting again, after the cooking zone has
cooled down. If you try to increase the setting again
and the display flashes, this means that it is not yet
possible to carry out the desired increase, because
the appliance is still too hot.
… all displays (inclusive of residual heat
indicator
h
) go out during cooking?
The overheating protection of the electronic controls
has blocked the use of the hob. Once the cooking
zone has cooled down it can be operated again.
… the display
f
lights up?
Check, whether
–
the touch controls are entirely or partly covered or
contaminated by liquid or by a wet cloth.
Clean the ceramic glass surface and wipe it dry.
Switch off the automatic safety cutout briefly or un-
screw the fuses.
If the
f
display continues to be illuminated please
contact customer services.
If after carrying out the above checks your appliance
is still faulty, disconnect from the mains supply and
contact your local Customer Service Centre.
In guarantee customers should ensure that the
above checks have been as the engineer will make a
charge if the fault is not a mechanical or electrical
breakdown.
Please note that proof of purchase is required for any
in-guarantee service calls.
Summary of Contents for EHS6610K
Page 22: ...22 Rating Plate ...
Page 24: ...45 Assembly Montering ...
Page 25: ...46 ...
Page 26: ...47 Removal Demontering ...