The automatic heat up function
The automatic heat up function starts when
you set a heat setting starting from
. A
cooking zone operates with the maximum
power for some time and than automatically
switches back to the heat setting you set.
If you set a higher heat setting during the au-
tomatic heat up (for example from
to
),
the automatic heat up is adjusted.
If there is still residual heat on the cooking
zone (display
), the automatic warm up
does not start.
The time of the automatic warm up changes
for different heat settings:
1
2
3
4
5
6
7
8
9
10
11
0
1
2
3
4
5
6
7
8
9
Using the Timer
Use the timer to set how long the cooking
zone operates for one cooking session.
Set the timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
•
Selection of the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on.
•
Starting and changing the timer:
touch
or of the cooking zone to set the time
(
00
-
99
minutes). When the indicator of
the cooking zone flashes slower, the time
counts down.
•
Stopping the timer:
select the cooking
zone with
and touch to switch off the
timer. The remaining time counts back-
wards to
00
. The indicator of the cooking
zone goes out. You can also touch
and
at the same time to switch off the timer.
•
Checking the remaining time:
select
the cooking zone with
. The indicator of
the cooking zone flashes faster. Display
shows the remaining time.
When the time elapses, the sound operates
and
00
flashes. The cooking zone switches
off.
•
Stopping the sound:
touch
.
You can use the timer as a
minute minder
while cooking zones do not operate. Touch
. Touch
or to select the time. When
the time elapses, the sound operates and
00
flashes
Starting the STOP+GO
The
function sets all cooking zones that
operate to a keep warm setting.
•
Touch
to start
this function. The sym-
bol
comes on.
•
Touch
to stop
this function. The heat
setting that you set before comes on.
does not stop the timer function.
fully locks the control panel but not the
sensor field
.
Locking / unlocking the control panel
You can lock the control panel, but not
.
It prevents an accidental change of the heat
setting during a cooking session.
Touch the symbol
. The symbol
comes
on for 4 seconds.
The Timer still operates.
Touch the symbol
to switch off this func-
tion. The heat setting that you set before
comes on.
When you switch off the appliance, you also
switch off this function.
The child safety device
This function prevents an accidental opera-
tion of the hob.
electrolux
7
Summary of Contents for EHS60140X
Page 1: ...user manual Ceramic glass hob EHS60140X ...
Page 11: ...electrolux 11 ...
