Problem
Possible
Remedy
The residual heat indicator
does not come on.
The cooking zone is not
hot because it operated
only for a short time.
If the cooking zone oper-
ated sufficiently long to be
hot, speak to the service
centre.
The Automatic Heat Up
function does not operate.
The cooking zone is hot.
Let the cooking zone be-
come sufficiently cool.
The highest heat setting is
set.
The highest heat setting
has the same power as
the Automatic Heat Up
function.
The heat setting changes
between two levels.
The Power management
is activated.
Refer to “Power manage-
ment”.
The sensor fields become
hot.
The cookware is too large
or you put it too near to
the controls.
Put large cookware on the
rear cooking zones if nec-
essary.
There is no signal when
you touch the panel sen-
sor fields.
The signals are deactiva-
ted.
Activate the signals (refer
to “OffSound control”).
comes on.
The Automatic Switch Off
operates.
Deactivate the appliance
and activate it again.
comes on.
The Child Safety Device or
the Lock function oper-
ates.
Refer to the chapter “Daily
use”.
comes on.
No cookware is on the
cooking zone.
Put cookware on the
cooking zone.
The cookware is incorrect. Use the correct cookware.
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone.
Use cookware with cor-
rect dimensions.
The cookware do not cov-
er the cross.
Cover the cross fully.
and a number come
on.
There is an error in the ap-
pliance.
Disconnect the appliance
from the electrical supply
for some time. Disconnect
the fuse from the electrical
system of the house. Con-
nect it again. If
comes
on again, speak to the
service centre.
comes on.
The electrical connection
is incorrect. The supply
voltage is out of range.
Speak to a qualified elec-
trician to check the instal-
lation.
ENGLISH
13
