Electrolux EHI3251BE, Installation & User Manual

Page: 15 / 33

1
5
Correct cookware position:
Incorrect cookware position:
FlexiBridge big bridge mode
To activate the mode press until you see the correct
mode indicator. This mode connects three rear sections
into one cooking zone. The one front section is not
connected and operates as a separate cooking zone. You
can set the heat setting for each zone separately. Use two
left side control bars.
OPERATING INSTRUCTIONS
(CONTINUED)
Correct cookware position:
To use this mode you have to place the cookware on the
three connected sections. If you use cookware smaller
than two sections the display shows and after 2
minutes the zone switches off.
Incorrect cookware position:
FlexiBridge max bridge mode
To activate the mode press until you see the correct
mode indicator. This mode connects all sections into one
cooking zone. To set the heat setting use one of the left
side control bars.