operate for 9 minutes. If the cooking
zones stay empty, the symbol comes
on. After 9 minutes an acoustic signal
sounds and the empty cooking zones are
set to .
To resume this function:
touch to
put or move cookware on the deactivated
pair of cooking zones.
To deactivate this function:
• Touch to deactivate the function for
the cooking zones you chose and keep
the last heat setting of the cooking
zones for this pair. The indicator goes
off.
• Set the heat setting to or let the
Count Down Timer deactivate the
cooking zones. The indicator goes off.
When the function is
deactivated, the pot
detection time is 2 minutes.
4.9
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the cooking zone then set the
function.
The selection of the Timer
function is possible for cooking zones that
are active and after the heat setting is set.
To set the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on. When
this function is active, comes on.
To activate the function:
touch of
the timer to set the time (
00 - 99
minutes).
When the indicator of the cooking zone
starts to flash slowly the time counts
down.
To see the remaining time:
set the
cooking zone with
. The indicator of the
cooking zone starts to flash quickly. The
display shows the remaining time.
To change the time:
set the cooking
zone with
. Touch or .
To deactivate the function:
set the
cooking zone with
and touch . The
remaining time counts back to
00
. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00
flashes. The cooking zone
deactivates.
To stop the sound:
touch .
CountUp Timer (The count up
timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone (if more than
1 cooking zone operates):
touch
again and again until the indicator of a
necessary cooking zone comes on. When
this function is active, comes on.
To activate the function:
touch . The
symbol goes out and comes on.
To see how long the cooking zone
operates:
set the cooking zone with
.
The indicator of the cooking zone starts to
flash quickly. The display shows how long
the zone operates. During the first minute
the display shows the time in seconds.
After the first minute the display shows the
time in minutes.
To deactivate the function:
set the
cooking zone with
and touch or .
The symbol goes out and comes
on.
If two functions operate at the
same time, the display shows
the CountUp Timer function
first.
Minute Minder
You can use this function as a
Minute
Minder
when the hob is activated and the
cooking zones do not operate (the heat
setting display shows ).
To activate the function:
touch .
Touch or of the timer to set the
www.electrolux.com
10
