7
electrolux gas cooktops
installation
This appliance must be installed by an authorised person
and in compliance with:
1.
AS 5601 ‘Gas Installations’ (Australia) or nZS
5261 ‘Installation of Gas Burning Appliances and
Equipment’ (new Zealand)
or the relevant installation
code for gas appliances of your country.
2. The local gas fitting regulations, municipal building
codes, electrical wiring regulations and any other
relevant statutory regulations.
3. The particular instructions as given below.
Installation instructions
caution
Cooktops are supplied set up for natural gas (NG).
To use on LPG, the injectors must be changed using
the conversion kit supplied. Refer LP conversion on
page 10.
4. A certificate of compliance MUST be given to the
customer after the application is successfully installed.
Figure 5a – Proud Fit
17
914
414
17
110 min*
880
380
133 min*
+1
0
+1
0
Gas supply
connection
location
R7 TYP
*to combustible surface
Figure 5b – Flush Fit
Gas supply
connection
location
The flush fit recess is 5mm deep. Refer Figure 6b for side
view detail.
Figure 6b – Flush Fit
Hob
Benchtop
Spring clip
Burner box
positioning clip
location
Figure 6a – Proud Fit
Foam seal
Hob
Spring clip
Burner box
Benchtop
Silicone
5mm
+0.5
0
Figure 7
2mm
46mm
