Electrolux EHG 6833, Operating Instructions Manual

Page: 17 / 76

electrolux 17
Building In
These hobs can be inserted in a
built-in kitchen unit whose depth is
between 550 and 600 mm. The hobs
dimensions are shown in Fig. 4.
The edge of the cut out must have a
minimum distance from the rear wall of
55 mm.
If there are side walls, or sides of the
furniture unit near the hob, the cut out
edges must have a minimum distance of
150 mm.
Hanging forniture units or hoods
must be placed at 650 mm. minimum
from the hob.
Fitting the hob to the worktop
Carry out the building in of the hob
as follows:
1. Place the seals supplied with the hob
on the front edge of the cut out.
Then, place them at 11 mm from the
side edges and at 10 mm from the
rear edge, as shown in the diagram,
A = Auxiliary burner
SR = Semi-rapid burner
R = Rapid burner
TC = Triple Crown burner
Fig. 5
Dimensions are given in
millimeters
R
SR
A
SR
510
594
TC
SR
A
SR
510
594
EHG 6415 EHG 6833-6835-6815
Fig. 4