background image

11

Step 15.

Using a large container run the water dispenser to clear 
air from lines. This may take a few minutes. Purge and 
dispense a minimum of 2 litres of water. Initial water may  
be black in colour. This is residual carbon dust from the 
filter and is non-toxic. If the water is slow to shut off or  
the dispenser is dripping, air may still be in the lines.  
Either purge more water through the system to remove 
this air or allow some time for the air to be removed over 
subsequent dispensing.

Step 16.

Switch ON Ice maker.

Step 17.

after 24 hours remove ice bin and dispose of first few 
batches of ice to ensure that impurities have been flushed 
from the system.

ICE & WaTER INSTaLLaTION

Tips and Useful Information

Ensure that taps are turned off when replacing and fitting 
filters. Remember to turn the taps back on when filter 
fitting is complete.
always fit filter as per manufacturer’s instructions, paying 
special attention to water flow direction.
If you need to replace water tube, only use approved 
water quality piping that meets the pressure requirements.
Do not allow the water tubing to become kinked 
or trapped under the refrigerator when moving the 
refrigerator back into position.
make sure your refrigerator is level to avoid uneven ice 
cubes.
after installation, run the water dispenser for a few 
minutes to remove carbon dust and to ensure that all air 
bubbles have been purged from the tubing. Dripping may 
occur if air bubbles remain in the tube.
Replace filter at suggested intervals to avoid water/ice 
reduction and irregularities in taste.
Remove and clean ice bin once a month, discarding 
unused ice cubes. This will ensure fresh, clean ice and 
smooth operation of your ice maker.
Clean and empty the dispenser drip tray regularly to avoid 
overflow.
as the water cut off is not instant, leave glass under 
dispenser briefly until water has stopped flowing to  
avoid spills.

If you have not used the dispenser for some time:
•  Discard the first seven or eight cups of water
•   Discard any ice that the ice maker produces in the  

first 24 hours (contaminants could have settled in  
the water pipes).

Summary of Contents for EHE5167S

























Reviews: