8
The electronic display panel consists of an LCD display
with black backlighting and 6 touch buttons. When the
power is first turned on, the display, with backlighting,
will activate.
If no buttons have been pressed and the fridge door is
closed the backlighting will turn off after 30 seconds.
fridge
alarm
reset
drinks
chill
freezer
fast
freeze
eco/
vacation
Controlling the temperature
We recommend that when you start your refrigerator for
the first time, the temperature for the refrigerator is set to
3°C and the freezer to -18°C. If you want to change the
temperature, follow the instructions below. make only
small adjustments and wait 24 hours to see if it’s correct.
Checking the softness of ice cream is a good indication
if your freezer is the right temperature, while feeling the
coldness of water kept in the refrigerator is a good way
of checking the temperature of the food compartment.
NOTE: When you set a temperature, you set an
average temperature for the whole refrigerator cabinet.
Temperatures inside each compartment may vary,
depending on how much food you store and where you
place it. High or low room temperature may also affect
the actual temperature inside the refrigerator.
If no button has been pressed for some time there
may be a delay of up to 2 seconds before the display
responds, this is normal and is a part of the display
design to reduce the chance of accidental changes.
Changing the freezer temperature
fridge
alarm
reset
drinks
chill
freezer
fast
freeze
eco/
vacation
Press the freezer button to make the freezer colder in 1°C
steps. Once the maximum of -23°C is reached, the display
will return to -14°C with the next press of the button.
The bar graph gets smaller with colder freezer settings.
Changing the refrigerator temperature
fridge
alarm
reset
drinks
chill
freezer
fast
freeze
eco/
vacation
Press the fridge button to make the refrigerator colder in
1°C steps. Once 0°C is reached, the display will return to
7°C with the next button press. The bar graph gets smaller
with colder refrigerator settings.
ELECTRONIC DISPLaY CONTROLS
Fast freeze function
fridge
alarm
reset
drinks
chill
freezer
fast
freeze
eco/
vacation
Use the fast freeze function when you add a large amount
of food to the freezer compartment. This freezes the
food quickly but does not affect the temperature in the
refrigerator compartment.
To use this function, press the fast freeze button once.
an animated icon will light up. The fast freeze function will
now operate for 90 minutes. If you want to turn the fast
freeze function off before 90 minutes have passed, simply
press the fast freeze button again. The icon will disappear
and the freezer will return to normal operation.
Freezer temperature alarm
fridge
alarm
reset
drinks
chill
freezer
fast
freeze
eco/
vacation
If the alarm sounds for no apparent reason, check whether
anything is keeping the door open. If the freezer becomes
too warm due to the freezer door being left open or warm
food being placed too close to the temperature sensor,
a buzzer will sound.
The icon adjacent to the alarm reset button, the freezer
set temperature and bar graph will all flash, until the
alarm reset button is pressed. Once pressed, the alarm
disable icon adjacent to the alarm button will illuminate
for 50 minutes, or until the temperature drops to an
acceptable level.
make sure nothing is holding the freezer door open and
move any warm food away from the temperature sensor.
If the freezer is still too warm after 50 minutes, the alarm
will sound again, indicating that something may be wrong
with the refrigerator.
NOTE: The freezer temperature alarm can be reset for
12 hours by pressing the alarm reset button continuously
for 10 seconds.
Door alarm
If the fridge or freezer door is left open for more than two
minutes, the alarm will buzz and an arrow pointing to an
open door will flash, along with the temperature setting
and bar graph.
If you want to leave the door open while you load the
refrigerator, you can turn the alarm off for 8 minutes by
pressing the alarm reset button.
If the fridge door is left open for more than 30 minutes, the
light will automatically turn off to save energy. To turn the
light back on simply close and reopen the door again.