background image

Turning the burner off

To put the flame out, turn the knob to the
off position  .

WARNING!

Always turn the flame down

or switch it off before you

remove the pans from the

burner.

4.2 

Induction cooking zones

Activating and deactivating

Touch   for 1 second to activate or

deactivate the hob.

Automatic Switch Off

The function deactivates the hob

automatically if:

• All cooking zones are deactivated.

• You do not set the heat setting after

you activate the hob.

• You spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• The hob gets too hot (e.g. when, a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• You use incorrect cookware. The

symbol   comes on and the cooking

zone deactivates automatically after 2

minutes.

• You do not deactivate a cooking zone

or change the heat setting. After some
time   comes on and the hob

deactivates. See below.

The relation between heat setting and

times of the function:

1

 - 

2

— 6 hours

3

 - 

4

 — 5 hours

5

 — 4 hours

6

 - 

9

 — 1.5 hours

The heat setting

Touch   to increase the heat setting.
Touch   to decrease the heat setting.
Touch   and   at the same time to

deactivate the cooking zone.

Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking
zone:

 touch 

 (  comes on).

Immediately touch   (  comes on).
Immediately touch   until the correct

heat setting comes on. After 3 seconds

 comes on.

To deactivate the function:

 touch  .

Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

To activate the function for a cooking
zone:

 touch 

.   comes on.

To deactivate the function:

 touch 

 or

.

Timer

Count Down Timer

You can use this function to set how long

the cooking zone operates for only this

one time.

First set the cooking zone then set the

function.

 You can set the heat setting

before or after you set the function.

www.electrolux.com

10

Summary of Contents for EGD6576NOK





























Reviews: