35
Installation
Unpacking
Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the one responsible for the transport
Damages, faults and eventually missing details
should immediately be reported to the seller.
Take care of the packing material so that small
children cannot play with it.
Placement
The hood is to be mounted on the wall.
When installed, the hood must be not less than
43cm. above electric burners or 75 cm. above gas
or mixed-fuel burners (fig. 6).
Electrical connection
Safety warnings for the electrician
Before connecting the appliance to the power
supply, check that the voltage indicated on the
rating plate corresponds to the mains power supply
available. Appliances fitted with a plug can be
connected to any standard power socket within
easy access.
Should it be necessary to provide a fixed
connection, the hood must only be installed by an
electrician authorised by the local electricity board.
When installing, an omnipolar disconnector with a
distance of at least 3 mm between contacts must
be provided.
This disconnector may be for example a switch,
fuses (plug fuses must be removed from the fuse
box, fault current switches and remote switches
Min
75 cm
Min
43 cm
Technical Specifications
Dimensions (in cm)
Height
39,5
Width
59,8
Depth
27,5 + Lichtblende (max. 430 + Lichtblende)
Lighting:
2 x 40 W (E14)
Grease filter
2
Maximum absorbed power
320 W
We reserve the right to generate constructive and chromatic modifications as required by technological growth.
Special accessories
Charcoal filter KLF 60/80
E-Nr. 610 899 421
Fig. 6
with a distance of over 3 mm between contacts.
The manufacture declines all responsibility for
malfunctions resulting from failure to comply with
the above instructions.
If the power socket is applied directly above the
hood this gives two advantages:
1. the socket is not visible.
2. the appliance can be disconnected at need
merely be removing the plug.
Electrical connection
220-240 V – by means of fixed power cable with
plug.
(Fixed connection of the appliance must only be
carried out by an authorised electrician.)