9
Operating Instructions
●
Adjustments made to cycle settings will be
remembered and recalled each time that
cycle is selected in the future.
4. Select the appropriate cycle and settings
for each load.
To return to factory settings,
press the
dry level
and
options
buttons at the same time and
hold until the signal sounds.
IMPORTANT
Clean the lint fi lter after every load.
CLEAN
LINT
will be displayed at the end of the cycle to
remind you to remove lint from the fi lter.
NOTE
If a setting is not available for the cycle
selected, the indicator will not light.
NOTE
To prevent unintentional and accidental
exposure of delicate material to excess heat
or unexpected steam, the
sanitize
temperature
setting and the
perfect steam
TM
option will
not be remembered and must be reselected
each time.
NOTE
If drying a single large or bulky item remove
the item part way through the cycle and turn it
“inside out” to maximize drying eff ectiveness.
Place item back in dryer and re-start cycle.
NOTE
Over-drying can cause wrinkles, shrinkage, lint,
harshness and a build up of static electricity.
5. Start
the
cycle.
●
Close the door and press
start
. The dryer will
not operate with the door open.
●
Select
delay start
to delay the beginning of
the cycle, if desired.
●
To add a forgotten item to the dryer drum,
press
pause
and open the door. Opening
the door with a cycle running will also pause
the cycle. Add the item, close the door and
press
start
to resume the cycle.
●
To change the settings or options after the
cycle starts, press
pause
, make the new
selections and press
start
again.
●
To change the cycle once the cycle has
begun, press
cancel
to stop the current
cycle, select a new cycle, and press
start
again. Just turning the cycle selector ring or
pressing the cycles button will not change
the cycle.
●
A signal will sound at the end of the cycle if
the chime option has been selected.
●
Press the
power
button turn on the unit.
●
Turn the cycle selector ring (on some mod-
els) in either direction or repeatedly press
the cycles button (on other models) to scroll
to the desired cycle. The indicator for that
cycle will be illuminated. See the “Cycle
Selection” section in this guide for descrip-
tions of each cycle.
●
The estimated drying time for Auto Dry
cycles or the actual drying time for Time Dry
cycles will be displayed.
●
A suitable drying temperature, dryness level
and options will automatically be indicated
for the cycle selected. See the “Dryer Set-
tings Chart” for more details.
●
To change the drying temperature, dry-
ness level, or drying time press the
temp
,
dry level
or
dry time
buttons to scroll to the
desired settings.
6. When the cycle ends, remove items imme-
diately and hang or fold.
●
To select or delete an option, press
options
;
then, while the indicator is blinking, press
set
.
The indicator will light when the option has
been selected. It will no longer be lighted
when the option has been deleted.