Electrolux EFC6620, User Manual

Page: 10 / 19

10 electrolux
Installation
EN
Hood body installation
• Before attaching the hood body,
tighten the two screws
Vr located on
the hood body mounting points.
• Hook the hood body onto the screws
12a .
• Fully tighten support screws 12a .
• Adjust screws Vr to level the hood
body
Connection in Ducting Version
When installing the ducting version,
connect the hood to the chimney using
either a
fl exible or rigid pipe ø 150 or
120 mm, the choice of which is left to
the installer.
• To install a ø 120 mm air exhaust con-
nection, insert the reducer fl ange 9 on
the hood body outlet.
• Fix the pipe in position using suf fi cient
pipe clamps (not supplied).
• Remove charcoal fi lters, if present.
Connection in Recycling Version
• Fix the fl ange 10 to the lower opening
of the connection 15 .
• Connect the hood air outlet to the
fl ange in the lower part of the junction
using a rigid or fl exible ø 150 tube (by
installer’s choice).
• Ensure that the charcoal fi lters have
been fi tted.
Electrical Connection
• Connect the hood to the mains
through a two-pole switch having a
contact gap of at least 3 mm.
• Remove the grease fi lters (see para-
graph Maintenance) being sure that
the connector of the feeding cable is
correctly inserted in the socket placed
on the side of the fan.
12a
Vr
9
ø 120 ø 150
ø 150
15
10