Electrolux EFC1060, Manual

Page: 9 / 52

ENGLISH 9
INSTALLATION
• Mark the centres of the Bores in the Safety
Brackets.
• Drill the points marked with a ø 8 mm drill bit.
• Insert the plugs 11 into the holes.
• Fix the Brackets and the Support, using the
Screws 12a (4.2 x 44.4) provided.
• In case of recycling version installation, you
should fix the upper bracket 7.2.1 , the holder
7.4 , the bracket 7.3 to the holder 7.4 and the
recycling connector 15 to the bracket 7.3 .
• Fasten 2 Screws 12r (4.2 x 12.7) provided into
the Hood Canopy fixing holes, positioned on
the front plate of the Hood Coupling Support,
leaving a space of 5-6 mm between the sup-
port and the head of the screw.
Wall drilling and bracket fixing
Wall marking:
• Rest the Bracket 7.2.1 as indicated 1-2 mm
from the ceiling or top limit.
• Mark the centres of the Bores in the Bracket.
• Rest the Bracket 7.2.1 as indicated X mm
under the first bracket (X = height of the Top
Chimney provided).
• Mark the centres of the Bores in the Bracket.
• Rest the Hood Coupling Support 7.1 as in-
dicated 1004 mm above the Cooker Top,
checking that the fixing bores are equidistant
from the corner of the wall.
• Mark the centres of the Bores in the Support.
• Drill the points marked with a ø 8 mm drill bit.
• Insert the plugs 11 into the holes.
• Draw a Horizontal line on the Wall 668 mm
above the Cooker Top.
• Rest the Safety Brackets 7.5 as indicated on
the reference Horizontal line, at a distance of
958 mm from the corner of the wall, checking
that they are level.