Electrolux EFC 9670-6670, User Manual

Page: 22 / 30

22 22
22 22 22 electr
electr
electr electr electrolux
olux
olux olux olux installation
GB
First decide which functioning First decide which functioning First decide which functioning First decide which functioning First decide which functioning
version is better for you
version is better for you
version is better for you version is better for you
version is better for you
If you decide to use the hood in
exhausting version we suggest you
position the upper section of the
chimney so that the oulet slots are not
visible once installation has ended, on
the contrary if it is decided to use the
hood in recycling version BE SURE that
the side with the slots is upright (see
also A-B-C sequence).
Assembling the chimney flue
support/bracket (3 parts)
The three parts should be fixed with 4
screws, the support extension is
adjustable and should correspond to
the internal width of the telescopic
chimney flue.
Assembling the deflector (3 parts – Assembling the deflector (3 parts –
Assembling the deflector (3 parts – Assembling the deflector (3 parts –
Assembling the deflector (3 parts –
only for filter version):
only for filter version):
only for filter version): only for filter version):
only for filter version):
The three parts should be fixed with 2
screws, the deflector extension is
adjustable and should correspond to
the width of the chimney flue support,
to which it is then fixed.
A
B
180°
C - OK!
=
=
X
X
G
4 x Ø 4x8
=
=
X
F
F
G
6 x
Ø 3,5 x 6,5