manualshive.com logo in svg

Electrolux EFA 90673, User Manual

Share
Download
Electrolux EFA 90673 User Manual Download Page 11

electrolux  

electrolux  

electrolux  

electrolux  

electrolux  

control panel    

11

11

11

11

11

GB

Maintenance and Care

•

••

•• Befor

Befor

Befor

Befor

Before performing any maintenance operation, isolate the hood fr

e performing any maintenance operation, isolate the hood fr

e performing any maintenance operation, isolate the hood fr

e performing any maintenance operation, isolate the hood fr

e performing any maintenance operation, isolate the hood from the

om the

om the

om the

om the

electrical supply by switching of

electrical supply by switching of

electrical supply by switching of

electrical supply by switching of

electrical supply by switching off at the connector and r

f at the connector and r

f at the connector and r

f at the connector and r

f at the connector and removing the

emoving the

emoving the

emoving the

emoving the

connector fuse.

connector fuse.

connector fuse.

connector fuse.

connector fuse.
Or if the appliance has been connected thr

Or if the appliance has been connected thr

Or if the appliance has been connected thr

Or if the appliance has been connected thr

Or if the appliance has been connected through a plug and socket, then the

ough a plug and socket, then the

ough a plug and socket, then the

ough a plug and socket, then the

ough a plug and socket, then the

plug must be r

plug must be r

plug must be r

plug must be r

plug must be removed fr

emoved fr

emoved fr

emoved fr

emoved from the socket.

om the socket.

om the socket.

om the socket.

om the socket.

Air suction panels

Air suction panels

Air suction panels

Air suction panels

Air suction panels

Remove the perimeter air suction
panels to access the grease filters.
The perimeter air suction panels are
attached to the cooker hood by a
series of pins

pins

pins

pins

pins and coupling springs

coupling springs

coupling springs

coupling springs

coupling springs;

pull them outwards and detach them
from the fastening cable

fastening cable

fastening cable

fastening cable

fastening cable.

Clean the perimeter air suction panels
as often as the grease filters (for more
information about gentle cleaning
methods, read the paragraph
“Cleaning” in the pages that follow).

When refitting the perimeter air suction
panels, ALWAYS reattach the fastening
cables.
Make sure the panels are attached to
the cooker hood properly (snap-
fastened).

x 4

Summary of Contents for EFA 90673




























Reviews:

No comments

Brands by name

Popular brands

Load more brands