Electrolux EEA22100L, User Manual

Page: 14 / 28

7.2 How to fill the rinse aid
dispenser
B
C
A
CAUTION!
Only use rinse aid designed
specifically for dishwashers.
1. Press the release element (A) to
open the lid (B).
2. Pour the rinse aid in the dispenser
(C) until the liquid reaches the
marking "FILL".
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the lid
locks into position.
8. DAILY USE
1. Open the water tap.
2. Press and hold until the appliance
is activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is
empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the
programme is complete.
8.1 Using the detergent
B
C
A
CAUTION!
Only use detergent designed
specifically for dishwashers.
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compartment
(A). You can use detergent in tablets,
powder or gel.
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
8.2 How to select and start a
programme using MY TIME
selection bar
1. Press the button dedicated to the
programme you want to select.
The light related to the button is on.
2. Activate ExtraPower if desired.
3. Close the appliance door to start the
programme.
8.3 How to select and start the
programme Pre-rinse
1. To select Pre-rinse, press and
hold for 3 seconds.
The light related to the button flashes.
2. Close the appliance door to start the
programme.
8.4 How to activate ExtraPower
1. Select a programme using MY TIME
selection bar.
www.electrolux.com 14