background image

7

Use

Press 

On/Off 

button

On/Off

3.

1. Sensor Program

You can use your dryer 2 ways

2. Timer Program

Switch On

The dryer will not operate unless the door safety
switch button is fully pressed in.

2.

DOOR SAFETY SWITCH

BUTTON

Start/Pause

 

button to continue.

Switch Off

Clean Lint Filter

Checking the Load

For the best drying performance, only add or remove
clothes near the beginning of the drying cycle.

When you have finished using the dryer, press the

On/Off

 button, to turn off the power, then switch off

at the power point. It is not recommended that the
power be left on to the dryer.

Refer to the table below for recommendations.

Now press the 

Start/Paus

e

 button to start the dryer.

Temperature

Normal

For drying most fabrics.

Delicates

Airing

Definition

Now press the 

Start/Pause

 button to start the dryer.

3.2 Timer Program

4.

5.

For drying delicates and
synthetics. It is lower heat
for the maximum care of
the fabrics.

After every load clean the lint filter to reduce drying
times and avoid overheating.

3.2.1

3.2.2

Press the 

Program

 button to select

either 

90, 60 

or 

30

 Minutes from the

Timer Program

.

Press the  

Temperature  

button to

select either 

Normal, 

or 

Delicates

from the 

Temperature program

.

Airing

  is not available in 

 Sensor

Program.

The indicator light will come on to
your choice.

The indicator light will come on to
your choice.

OPERATING SEQUENCE 

(continued)

3.1 Sensor Program

Do not select the 

Extra Dry

 option for delicates

fabric such as polyester as shrinking may occur.

This mode gives you the option of selecting different drying
levels from the 

Sensor Program

.

3.1.1

3.1.2

Press the 

Program 

button to select

either  

button.

Extra Dry,  Normal Dry  

or

Iron Dry

 from the 

Sensor Program

The indicator light will come on to
your choice.

Using this mode gives you the option of selecting a number
of features from the  

Timer Program

 including the

Temperature you require.

 

Press the  

Temperature

  button to

select either

Normal,  Delicates

  or  

Airing.

The indicator light will come on to
your choice.

This setting does not heat.
It only circulates air in the
dryer to shake out dust and
refresh clothes.

Summary of Contents for EDV705G

















Reviews: